Melittin(Synonyms: 蜂毒肽)

上海金畔生物科技有限公司为生命科学和医药研发人员提供生物活性分子抑制剂、激动剂、特异性抑制剂、化合物库、重组蛋白,专注于信号通路和疾病研究领域。

Melittin (Synonyms: 蜂毒肽)

Melittin 是一种PLA2激活剂,可刺激低分子量 PLA2 的活性,而不会提高高分子量 PLA2 的活性。

Melittin(Synonyms: 蜂毒肽)

Melittin Chemical Structure

CAS No. : 20449-79-0

规格 价格 是否有货
5 mg ¥1500 询问价格 & 货期
10 mg ¥2600 询问价格 & 货期
25 mg ¥5200 询问价格 & 货期

* Please select Quantity before adding items.

Melittin 的其他形式现货产品:

Melittin TFA

生物活性

Melittin is a PLA2 activator, stimulates the activity of the low molecular weight PLA2, while it does not the increase activity of the high molecular weight PLA2[1][2].

IC50 & Target

PLA2[1]

体外研究
(In Vitro)

Melittin, an immunologically related PLA2 stimulating peptide from bee venom, increases the activity of the high molecular weight enzyme[1]. Melittin is a cytotoxic peptide from bee venom. Melittin exhibits toxicity against both A2780CR and A2780 cells, with IC50 values of 4.5 and 6.8 μg/mL, respectively. Melittin has natural anti-bacterial, anti-viral, and anti-inflammatory properties. It has also been shown to have diverse anticancer effects in several different cancer cell lines including those of gastric, breast, ovarian, liver, prostate, cervical, and lung origins. The mechanisms by which Melittin, an amphipathic haemolytic peptide, exerts its potential anticancer effects include inhibition of cell proliferation, induction of apoptosis, and direct necrosis. Melittin can also prevent EGF-induced cell invasion through its inhibition of the PI3K/Akt/mTOR signaling pathway, but this is primarily related to breast cancer cells[2].

上海金畔生物科技有限公司 has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

2846.46

Formula

C131H229N39O31

CAS 号

20449-79-0

Sequence

Gly-Ile-Gly-Ala-Val-Leu-Lys-Val-Leu-Thr-Thr-Gly-Leu-Pro-Ala-Leu-Ile-Ser-Trp-Ile-Lys-Arg-Lys-Arg-Gln-Gln-NH2

Sequence Shortening

GIGAVLKVLTTGLPALISWIKRKRQQ-NH2

中文名称

蜂毒肽;蜂毒素

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式
Powder -80°C 2 years
-20°C 1 year
In solvent -80°C 6 months
-20°C 1 month
Solvent & Solubility
In Vitro: 

H2O

Peptide Solubility and Storage Guidelines:

1.  Calculate the length of the peptide.

2.  Calculate the overall charge of the entire peptide according to the following table:

  Contents Assign value
Acidic amino acid Asp (D), Glu (E), and the C-terminal -COOH. -1
Basic amino acid Arg (R), Lys (K), His (H), and the N-terminal -NH2 +1
Neutral amino acid Gly (G), Ala (A), Leu (L), Ile (I), Val (V), Cys (C), Met (M), Thr (T), Ser (S), Phe (F), Tyr (Y), Trp (W), Pro (P), Asn (N), Gln (Q) 0

3.  Recommended solution:

Overall charge of peptide Details
Negative (<0) 1.  Try to dissolve the peptide in water first.
2.  If water fails, add NH4OH (<50 μL).
3.  If the peptide still does not dissolve, add DMSO (50-100 μL) to solubilize the peptide.
Positive (>0) 1.  Try to dissolve the peptide in water first.
2.  If water fails, try dissolving the peptide in a 10%-30% acetic acid solution.
3.  If the peptide still does not dissolve, try dissolving the peptide in a small amount of DMSO.
Zero (=0) 1.  Try to dissolve the peptide in organic solvent (acetonitrile, methanol, etc.) first.
2.  For very hydrophobic peptides, try dissolving the peptide in a small amount of DMSO, and then dilute the solution with water to the desired concentration.
参考文献
  • [1]. Steiner MR, et al. Responses of purified phospholipases A2 to phospholipase A2 activating protein (PLAP) and Melittin. Biochim Biophys Acta. 1993 Feb 10;1166(1):124-30.

    [2]. Alonezi S, et al. Metabolomic Profiling of the Effects of Melittin on Cisplatin Resistant and Cisplatin Sensitive Ovarian Cancer Cells Using Mass Spectrometry and Biolog Microarray Technology. Metabolites. 2016 Oct 13;6(4). pii: E35.

Cell Assay
[2]

Melittin is purified from bee venom by reversed phase liquid chromatography and reconstituted in sterile water to form a stock solution of 1 mg/mL before storage at -20 °C until required for analysis. Cell viability is assessed by an Alamar Blue (AB) cell viability reagent. Both A2780 and A2780CR cells are seeded at 1×104 cells/well in 96-well plates and incubated at 37 °C and 5% CO2 in a humidified atmosphere for 24 h. After this incubation period, the cells are treated with various concentrations of Melittin ranging from 0.5 to 14 µg/mL in 100 μL of medium, and re-incubated at 37 °C and 5% CO2 for a further 24 h. Triton X at 1% (v/v) and cell culture media are used as positive and negative controls, respectively. After this, AB is added at a final concentration of 10% (v/v) and the resultant mixture is incubated for a further 4 h at 37 °C and 5% CO2. Then, the plates are read at an excitation wavelength of 560 nm and the emission at 590 nm is recorded on a SpectraMax M3 microplate reader . Background-corrected fluorescence readings are converted to cell viability data for each test well by expressing them as percentages relative to the mean negative control value[2].

上海金畔生物科技有限公司 has not independently confirmed the accuracy of these methods. They are for reference only.

参考文献
  • [1]. Steiner MR, et al. Responses of purified phospholipases A2 to phospholipase A2 activating protein (PLAP) and Melittin. Biochim Biophys Acta. 1993 Feb 10;1166(1):124-30.

    [2]. Alonezi S, et al. Metabolomic Profiling of the Effects of Melittin on Cisplatin Resistant and Cisplatin Sensitive Ovarian Cancer Cells Using Mass Spectrometry and Biolog Microarray Technology. Metabolites. 2016 Oct 13;6(4). pii: E35.

所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务