SBE13

上海金畔生物科技有限公司为生命科学和医药研发人员提供生物活性分子抑制剂、激动剂、特异性抑制剂、化合物库、重组蛋白,专注于信号通路和疾病研究领域。

SBE13 

SBE13 是一种有效的,选择性的 Plk1 抑制剂,IC50 值为 200 pM,对 Plk2 (IC50>66 μM) 或 Plk3 (IC50=875 nM) 的作用较弱。

SBE13

SBE13 Chemical Structure

CAS No. : 775294-82-1

规格 是否有货
100 mg   询价  
250 mg   询价  
500 mg   询价  

* Please select Quantity before adding items.

SBE13 的其他形式现货产品:

SBE13 Hydrochloride

生物活性

SBE13 is a potent and selective Plk1 inhibitor, with an IC50 of 200 pM; SBE13 poorly inhibits Plk2 (IC50>66 μM) or Plk3 (IC50=875 nM).

IC50 & Target

PLK1

200 pM (IC50)

PLK3

875 nM (IC50)

体外研究
(In Vitro)

SBE13 significantly reduce cell proliferation and induce apoptosis in HeLa cells, with an EC50 of 18 μM[1]. SBE13 (1-100 μM) shows no effect on Caspase 3/7 activity in NIH-3T3 cells. SBE13 (66 and 100 μM) does not change morphology after treatment of primary cells. SBE13 (10 and 100 μM) reduces pRb staining in primary cells, and this indicates a G0/G1 arrest[2]. SBE13 (66 and 100 μM) increases levels of cyclin B1, phospho histone H3, Wee1, Emi1 and securin, and results in cleavage of Cdc27 in HeLa cells. SBE13 (10 and 100 μM) also induces apoptosis of HeLa cells[3].

Shanghai Jinpan Biotech Co Ltd has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

442.94

Formula

C24H27ClN2O4

CAS 号

775294-82-1

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

参考文献
  • [1]. Keppner S, et al. Identification and validation of a potent type II inhibitor of inactive polo-like kinase 1. ChemMedChem. 2009 Nov;4(11):1806-9.

    [2]. Keppner S, et al. Fate of primary cells at the G?/S boundary after polo-like kinase 1 inhibition by SBE13. Cell Cycle. 2011 Feb 15;10(4):708-20. Epub 2011 Feb 15.

    [3]. Keppner S, et al. Biological impact of freezing Plk1 in its inactive conformation in cancer cells. Cell Cycle. 2010 Feb 15;9(4):761-73. Epub 2010 Feb 16.

Kinase Assay
[1]

To assay Plk1 kinase activity, cells are lysed after 13 h release in the presence of SBE13 after double thymidine block and kinase is immunoprecipitated from lysates using antibodies. In brief, for each immunoprecipitation 800 μg of total protein are incubated with Plk1 antibody cocktail (1.5 μg) for 2 h at 4°C on a rotator. Immunoprecipitated protein is collected using Protein A/G Agarose beads. Plk1 immunoprecipitates are incubated with casein (1 μg) and with [γ-32P]ATP (1 μCi) for 30 min at 37°C in kinase buffer. Products from the kinase assays are fractionated on 10 % bis-tris-polyacrylamide gels, and phosphorylated substrate is visualized by autoradiography after an exposure of 12-36 h. Equal amounts of immunoprecipitates are subjected to Western blot analysis to confirm equal loading of Plk1 protein in kinase reactions[1].

Shanghai Jinpan Biotech Co Ltd has not independently confirmed the accuracy of these methods. They are for reference only.

参考文献
  • [1]. Keppner S, et al. Identification and validation of a potent type II inhibitor of inactive polo-like kinase 1. ChemMedChem. 2009 Nov;4(11):1806-9.

    [2]. Keppner S, et al. Fate of primary cells at the G?/S boundary after polo-like kinase 1 inhibition by SBE13. Cell Cycle. 2011 Feb 15;10(4):708-20. Epub 2011 Feb 15.

    [3]. Keppner S, et al. Biological impact of freezing Plk1 in its inactive conformation in cancer cells. Cell Cycle. 2010 Feb 15;9(4):761-73. Epub 2010 Feb 16.

所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务

SBE13 Hydrochloride

上海金畔生物科技有限公司为生命科学和医药研发人员提供生物活性分子抑制剂、激动剂、特异性抑制剂、化合物库、重组蛋白,专注于信号通路和疾病研究领域。

SBE13 Hydrochloride  纯度: 98.76%

SBE13 Hydrochloride 是一种有效的,选择性的 Plk1 抑制剂,IC50 值为 200 pM,对 Plk2 (IC50>66 μM) 或 Plk3 (IC50=875 nM) 的作用较弱。

SBE13 Hydrochloride

SBE13 Hydrochloride Chemical Structure

CAS No. : 1052532-15-6

规格 价格 是否有货 数量
Free Sample (0.1-0.5 mg)   Apply now  
10 mM * 1 mL in DMSO ¥869 In-stock
10 mg ¥790 In-stock
50 mg ¥3000 In-stock
100 mg   询价  
200 mg   询价  

* Please select Quantity before adding items.

SBE13 Hydrochloride 相关产品

相关化合物库:

  • Covalent Screening Library Plus
  • Bioactive Compound Library Plus
  • Apoptosis Compound Library
  • Cell Cycle/DNA Damage Compound Library
  • Kinase Inhibitor Library
  • Anti-Cancer Compound Library
  • Autophagy Compound Library
  • Anti-Aging Compound Library
  • Covalent Screening Library
  • Targeted Diversity Library

生物活性

SBE13 Hydrochloride is a potent and selective Plk1 inhibitor, with an IC50 of 200 pM; SBE13 Hydrochloride poorly inhibits Plk2 (IC50>66 μM) or Plk3 (IC50=875 nM).

IC50 & Target[1]

PLK1

200 pM (IC50)

PLK3

875 nM (IC50)

体外研究
(In Vitro)

SBE13 significantly reduce cell proliferation and induce apoptosis in HeLa cells, with an EC50 of 18 μM[1]. SBE13 (1-100 μM) shows no effect on Caspase 3/7 activity in NIH-3T3 cells. SBE13 (66 and 100 μM) does not change morphology after treatment of primary cells. SBE13 (10 and 100 μM) reduces pRb staining in primary cells, and this indicates a G0/G1 arrest[2]. SBE13 (66 and 100 μM) increases levels of cyclin B1, phospho histone H3, Wee1, Emi1 and securin, and results in cleavage of Cdc27 in HeLa cells. SBE13 (10 and 100 μM) also induces apoptosis of HeLa cells[3].

上海金畔生物科技有限公司 has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

479.40

Formula

C24H28Cl2N2O4

CAS 号

1052532-15-6

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

溶解性数据
In Vitro: 

DMSO : ≥ 100 mg/mL (208.59 mM)

H2O : 5 mg/mL (10.43 mM; Need ultrasonic)

* “≥” means soluble, but saturation unknown.

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.0859 mL 10.4297 mL 20.8594 mL
5 mM 0.4172 mL 2.0859 mL 4.1719 mL
10 mM 0.2086 mL 1.0430 mL 2.0859 mL

*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: ≥ 2.5 mg/mL (5.21 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (5.21 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

    将 0.9 g 氯化钠,完全溶解于 100 mL ddH₂O 中,得到澄清透明的生理盐水溶液

  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.5 mg/mL (5.21 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (5.21 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

    将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中,再用生理盐水定容至 10 mL,完全溶解,澄清透明
  • 3.

    请依序添加每种溶剂: 10% DMSO    90% corn oil

    Solubility: ≥ 2.5 mg/mL (5.21 mM); Clear solution

    此方案可获得 ≥ 2.5 mg/mL (5.21 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。

    以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。

*以上所有助溶剂都可在 上海金畔生物科技有限公司 网站选购。
参考文献
  • [1]. Keppner S, et al. Identification and validation of a potent type II inhibitor of inactive polo-like kinase 1. ChemMedChem. 2009 Nov;4(11):1806-9.

    [2]. Keppner S, et al. Fate of primary cells at the G?/S boundary after polo-like kinase 1 inhibition by SBE13. Cell Cycle. 2011 Feb 15;10(4):708-20. Epub 2011 Feb 15.

    [3]. Keppner S, et al. Biological impact of freezing Plk1 in its inactive conformation in cancer cells. Cell Cycle. 2010 Feb 15;9(4):761-73. Epub 2010 Feb 16.

Kinase Assay
[1]

To assay Plk1 kinase activity, cells are lysed after 13 h release in the presence of SBE13 after double thymidine block and kinase is immunoprecipitated from lysates using antibodies. In brief, for each immunoprecipitation 800 μg of total protein are incubated with Plk1 antibody cocktail (1.5 μg) for 2 h at 4°C on a rotator. Immunoprecipitated protein is collected using Protein A/G Agarose beads. Plk1 immunoprecipitates are incubated with casein (1 μg) and with [γ-32P]ATP (1 μCi) for 30 min at 37°C in kinase buffer. Products from the kinase assays are fractionated on 10 % bis-tris-polyacrylamide gels, and phosphorylated substrate is visualized by autoradiography after an exposure of 12-36 h. Equal amounts of immunoprecipitates are subjected to Western blot analysis to confirm equal loading of Plk1 protein in kinase reactions[1].

上海金畔生物科技有限公司 has not independently confirmed the accuracy of these methods. They are for reference only.

参考文献
  • [1]. Keppner S, et al. Identification and validation of a potent type II inhibitor of inactive polo-like kinase 1. ChemMedChem. 2009 Nov;4(11):1806-9.

    [2]. Keppner S, et al. Fate of primary cells at the G?/S boundary after polo-like kinase 1 inhibition by SBE13. Cell Cycle. 2011 Feb 15;10(4):708-20. Epub 2011 Feb 15.

    [3]. Keppner S, et al. Biological impact of freezing Plk1 in its inactive conformation in cancer cells. Cell Cycle. 2010 Feb 15;9(4):761-73. Epub 2010 Feb 16.

所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务